top of page
Fold and glue into corners
With fabric
Make a line in the extension of each side of the structure.
Cut along the lines, stopping 2mm from the cardboard (2mm = thickness of the cardboard).
Cut the strip between two cuts.
Glue the edge of one side of the structure, then fold and glue the fabric. Flatten the edge to the corner with a folder. Repeat with the opposite side.
Glue the fabric of the other two sides; the corners will form themselves. Flatten with a folder.
With paper
Make a line in the extension of each side of the structure, as above.
For the same angle, cut on one side on the line, stopping at 2 mm from the cardboard, then at 90°.
On the other side, cut along the line, stopping 2 mm from the cardboard, then at an angle to the corner of the structure.
Start by gluing the sides that are cut at right angles, then fold over the other sides.
bottom of page